LM386 op/audio amp
This content will be shared across all product pages.
The LM386 is a low voltage audio power amplifier designed for use in consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pins 1 and 8 will increase the gain to any value from 20 to 200. The input common-mode range includes ground, and the amplifier is ideal for battery operation.
Key Features:
- Power Supply Range: 4V to 12V, or 5V to 18V
- Low Quiescent Current: 4mA (typical)
- Voltage Gain: Internally fixed at 20 (adjustable to 200)
- Output Power: 700mW into an 8Ω load with a 9V supply
- Wide Supply Voltage Range: 4V to 12V or 5V to 18V
- Low Distortion: 0.2% THD (typical)
- Low External Component Count: Requires only a few external components
- High Gain: Adjustable from 20 to 200
- Low Power Consumption: Suitable for battery operation
- Supply Voltage Range: 4V to 12V, or 5V to 18V
- Quiescent Current: 4mA (typical)
- Output Power: 700mW into an 8Ω load with a 9V supply
- Voltage Gain: 20 to 200 (adjustable with external components)
- Bandwidth: 300kHz
- Input Bias Current: 250nA (typical)
- Input Resistance: 50kΩ (typical)
- Operating Temperature Range: 0°C to +70°C
- Package: 8-pin PDIP (Plastic Dual In-line Package) or SOIC (Small Outline Integrated Circuit)
- Portable Audio Systems: Ideal for battery-operated audio applications.
- Radio and TV Sound Systems: Suitable for use in audio output stages of radios and TVs.
- Intercoms: Used in intercom and communication devices for sound amplification.
- Ultrasonic Drivers: Can be used in ultrasonic transducer driver circuits.
- Line Drivers: Suitable for use as a line driver in various audio applications.
- Small Signal Amplification: Useful in various circuits requiring small signal amplification.
Technical Specifications:
- Logic Family: CMOS
- Number of Channels: 3
- Switch Configuration: Single-Pole Double-Throw (SPDT)
- Supply Voltage Range: 3V to 15V
- “ON” Resistance (R_ON): 125Ω typical at V_DD = 10V
- “OFF” Leakage Current (I_OFF): ±100pA typical at V_DD = 10V
- Control Input Voltage (V_IH): 0.7 V_DD min, 0.3 V_DD max
- Maximum Operating Frequency: 40 MHz at V_DD = 10V
Applications:
- Signal routing and switching
- Analog and digital multiplexing
- Audio and video signal processing
- Data acquisition systems
- Test equipment