74HC541 logic-buffer driver
This content will be shared across all product pages.
The 74HC541 is a high-speed CMOS logic buffer/driver featuring octal non-inverting buffers/drivers with 3-state outputs. It is designed for high-speed operation and low power consumption, suitable for driving bus lines or buffer memory address registers. The 74HC541 has two output enable (OE) inputs, each controlling four outputs, and can be used in a wide range of digital applications.
Key Features:
- Octal non-inverting buffers/drivers
- 3-state outputs for bus-oriented applications
- Two output enable inputs for flexible control
- Wide supply voltage range: 2V to 6V
- High-speed CMOS technology
- Low power consumption
- High noise immunity
- TTL-compatible inputs
- Suitable for use as a memory address driver, clock driver, and bus-oriented receiver/transmitter
- Supply Voltage (VCC): 2V to 6V
- Input Voltage Range: 0V to VCC
- High-Level Output Voltage (VOH): VCC - 0.1V (min at VCC = 4.5V)
- Low-Level Output Voltage (VOL): 0.1V (max at VCC = 4.5V)
- High-Level Input Voltage (VIH): 70% of VCC (min)
- Low-Level Input Voltage (VIL): 30% of VCC (max)
- Propagation Delay Time: 13 ns (typical at VCC = 5V)
- Operating Temperature Range: -40°C to +85°C
- Package: 20-pin DIP, SOIC, TSSOP
- Bus Drivers: Ideal for driving data buses in digital systems.
- Memory Address Drivers: Suitable for driving memory address registers.
- Clock Drivers: Used to distribute clock signals in digital circuits.
- Data Buffers: Prevents signal degradation in data transfer applications.
- Transmitters/Receivers: Employed in bus-oriented systems as transmitters/receivers.
Technical Specifications:
- Logic Family: CMOS
- Number of Channels: 3
- Switch Configuration: Single-Pole Double-Throw (SPDT)
- Supply Voltage Range: 3V to 15V
- “ON” Resistance (R_ON): 125Ω typical at V_DD = 10V
- “OFF” Leakage Current (I_OFF): ±100pA typical at V_DD = 10V
- Control Input Voltage (V_IH): 0.7 V_DD min, 0.3 V_DD max
- Maximum Operating Frequency: 40 MHz at V_DD = 10V
Applications:
- Signal routing and switching
- Analog and digital multiplexing
- Audio and video signal processing
- Data acquisition systems
- Test equipment