30 inch Big Base flex connector F/F
This content will be shared across all product pages.
The 30-inch Big Base Flex Connector F/F is a flexible flat cable (FFC) designed for robust and reliable connections between two female connectors. This type of connector is commonly used in larger electronic assemblies where flexibility and durability are essential. It is ideal for connecting components such as displays, sensors, and other modules in various electronic applications.
Key Features:
- Length: 30 inches (approximately 76 cm)
- Connector Type: Female-to-Female (F/F)
- Cable Type: Flexible flat cable (FFC)
- Pitch: Varies (commonly 0.5mm, 1.0mm, or 2.54mm)
- Conductors: Multiple conductors (typically 8, 10, 12, 20, etc.)
- Insulation: High-quality insulating material for durability and flexibility
- Outer Jacket: Enhanced outer jacket for additional protection and durability
- Compatibility: Suitable for a variety of electronic applications
- Length: 30 inches (76 cm)
- Width: Varies depending on the number of conductors and pitch
- Pitch: Common pitches are 0.5mm, 1.0mm, and 2.54mm
- Number of Conductors: Typically 8, 10, 12, 20, or other configurations
- Voltage Rating: Varies (typically up to 60V)
- Current Rating: Varies (typically up to 1A per conductor)
- Temperature Range: -20°C to 80°C
- Material: Conductors are usually copper; insulation is typically polyester or polyimide
- Flexibility: High flexibility for use in tight spaces and moving parts
- Durability: Designed to withstand repeated flexing and bending
- Outer Jacket: Enhanced outer jacket for added durability
- Displays: Connecting larger LCD or OLED displays to controllers or mainboards.
- Sensors: Interfacing various sensors in electronic assemblies.
- Modules: Connecting different modules in DIY electronics and prototyping.
- Consumer Electronics: Used in larger devices where robust connections are essential.
- Industrial: Suitable for use in industrial equipment and machinery requiring flexible interconnections.
Technical Specifications:
- Logic Family: CMOS
- Number of Channels: 3
- Switch Configuration: Single-Pole Double-Throw (SPDT)
- Supply Voltage Range: 3V to 15V
- “ON” Resistance (R_ON): 125Ω typical at V_DD = 10V
- “OFF” Leakage Current (I_OFF): ±100pA typical at V_DD = 10V
- Control Input Voltage (V_IH): 0.7 V_DD min, 0.3 V_DD max
- Maximum Operating Frequency: 40 MHz at V_DD = 10V
Applications:
- Signal routing and switching
- Analog and digital multiplexing
- Audio and video signal processing
- Data acquisition systems
- Test equipment