5V 10A Power Supply
This content will be shared across all product pages.
The 5V 10A Power Supply is a high-quality, reliable power source designed to provide a stable 5V output with a maximum current of 10A. It is suitable for a wide range of applications, including powering single-board computers like the Raspberry Pi, microcontroller projects, LED strips, and other electronic devices that require a steady 5V supply. The power supply features over-voltage, over-current, and short-circuit protection to ensure safety and longevity of connected devices.
Key Features:
- Output Voltage: 5V DC
- Output Current: 10A
- Power Output: 50W
- Input Voltage: 100-240V AC, 50/60Hz
- Connector Type: 5.5mm x 2.1mm DC barrel jack
- Protection: Over-voltage, over-current, and short-circuit protection
- Efficiency: High efficiency for reliable power delivery
- Cooling: Built-in cooling fan or heat dissipation mechanism
- Certifications: CE, FCC, RoHS compliant
- Output Voltage: 5V DC ± 5%
- Output Current: 10A
- Power Output: 50W
- Input Voltage: 100-240V AC, 50/60Hz
- Ripple & Noise: ≤ 120mV
- Load Regulation: ± 2%
- Line Regulation: ± 1%
- Operating Temperature: -10°C to +60°C
- Storage Temperature: -20°C to +85°C
- Humidity: 0% to 95% non-condensing
- Dimensions: Approx. 115mm x 50mm x 30mm
- Weight: 200 g
- Connector Type: 5.5mm x 2.1mm DC barrel jack
- Cable Length: Approx. 1.2 meters
- Single-board Computers: Ideal for powering Raspberry Pi, Arduino, and other microcontroller projects.
- LED Strips: Suitable for powering 5V LED strips and other lighting projects.
- DIY Electronics: Perfect for hobbyists and makers working on various electronics projects.
- Industrial Use: Suitable for industrial control systems and other applications requiring a stable 5V power source.
- Communication Equipment: Can be used to power communication devices and networking equipment.
Technical Specifications:
- Logic Family: CMOS
- Number of Channels: 3
- Switch Configuration: Single-Pole Double-Throw (SPDT)
- Supply Voltage Range: 3V to 15V
- “ON” Resistance (R_ON): 125Ω typical at V_DD = 10V
- “OFF” Leakage Current (I_OFF): ±100pA typical at V_DD = 10V
- Control Input Voltage (V_IH): 0.7 V_DD min, 0.3 V_DD max
- Maximum Operating Frequency: 40 MHz at V_DD = 10V
Applications:
- Signal routing and switching
- Analog and digital multiplexing
- Audio and video signal processing
- Data acquisition systems
- Test equipment